Home > Equipment > Warewashing
Choose a sub category:
Dish Racks, Dollies Disposals, Disposers, Waste Drains Faucets, Assemblies
Flatware Washing, Storage Glass Washers, Glass Racks etc. Misc Warewashing
Pre Rinse, Spray Units Sinks, Dishtables Warewashers, General
Water, Booster Heaters
Warewashing, Sinks
Sort By:
Page of 9
GW-120 062X C-9
The Redhead Glass Washer, upright, electric, (5) brush, (4) 7" brushes and (1) 8-3/4" brush, stainless steel base with rubber feet, brass bearings and nylon gears inside base, 1/3 HP, 4.3 amps, 115v/60/1-ph, 7' cord, NEMA 5-15P, CE Nozzle, swivel, 12" long, standard, stream regulator outlet, low-lead, chrome-plated brass, NSF (deduct cost of standard nozzle) (replaces B-1912-14) Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 9-KW, stainless steel front panel, powder-coated silver-gray hammertone body, 6" plastic non-adjustable legs, Castone tank, NSF, cUL, UL
18-53C 314-16-3 314-16-3-18R
Standard 1800 Series, Underbar Sink Unit, three compartment, 60"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboards on left & right, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF 314 Series Coved Corner Sink, three compartment, 58-3/4"W x 27-1/2"D, 304 stainless steel construction, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossrails, adjustable bullet feet, NSF 314 Series Coved Corner Sink, three compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on right, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossrails, adjustable bullet feet, NSF
HSA-10-FL HSA-10-FLDP B6C-4-22
Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, lever drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, 1/2" NPS water inlet, towel & soap dispensers, lever drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF 2200 Series Underbar Sink Unit, four compartment, 72"W x 24"D x 33-1/2"H, 304 stainless steel construction, 10" wide x 14" front-to-back x 10" deep seamless deep-drawn compartments, 12-1/2" drainboards on left & right, 4-1/2"H backsplash with rear deck, bullnose front edge, (2) 4" OC splash mount faucets with 10" spouts, includes 1-1/2" drains & removable overflow standpipes, galvanized back panel, galvanized legs with adjustable bullet feet, NSF
314-16-3-18L HSA-10-FA 414-16-3
314 Series Coved Corner Sink, three compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on left, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossrails, adjustable bullet feet, NSF Hand Sink, wall mount, 13-1/2" wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, P-trap & tail piece, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF 414 Series Coved Corner Sink, three compartment, 58-3/4"W x 27-1/2"D, 430 stainless steel top with 304 stainless steel sink bowls, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edge on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossbracing, adjustable plastic bullet feet, NSF
414-16-3-18R B6C-22 18-43L
414 Series Coved Corner Sink, three compartment, 74-3/8"W x 27-1/2"D, 430 stainless steel top with 304 stainless steel sink bowls, 16"W x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on right, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edge on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossbracing, adjustable plastic bullet feet, NSF 2200 Series Underbar Sink Unit, three compartment, 72"W x 24"D x 33-1/2"H, 304 stainless steel construction, 10" wide x 14" front-to-back x 10" deep seamless deep-drawn compartments, 18-1/2" drainboards on left & right, 4-1/2"H backsplash with rear deck, bullnose front edge, 4" OC splash mount faucet with 10" spout, includes 1-1/2" drains & removable overflow standpipes, galvanized back panel, galvanized legs with adjustable bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, three compartment, 48"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboard on right, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF
314-16-3-18 18-43R 18-64C
314 Series Coved Corner Sink, three compartment, 90"W x 27-1/2"D, 304 stainless steel construction, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 18" drainboards on left & right, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossrails, adjustable bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, three compartment, 48"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboard on left, splash mount faucet with swing spout (low lead compliant), apron on front & sides, includes (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, four compartment, 72"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboards on left & right, splash mount faucet with double jointed spout (low lead compliant), apron on front & sides, includes (4) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF
414-16-3-18L 1524B 1524G
414 Series Coved Corner Sink, three compartment, 74-3/8"W x 27-1/2"D, 430 stainless steel top with 304 stainless steel sink bowls, 16"W x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on left, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edge on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossbracing, adjustable plastic bullet feet, NSF Cutlery Bin, 21-5/8" x 12" x 3-3/4", 4 compartment, stackable, black, dishwasher safe, high density polyethylene, FDA approved (must be purchased in multiples of 12 each) Cutlery Bin, 21-5/8" x 12" x 3-3/4", 4 compartment, stackable, gray, dishwasher safe, high density polyethylene, FDA approved (must be purchased in multiples of 12 each)
100 200 S419
Disposer, basic unit only, 1 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE Disposer, basic unit only, 2 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE Trough Collector™, trough conveyor & collecting system (widely accepted in areas where disposers are restricted), HYDROLOGIC® with LCD readout, trough diffuser, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen ,stainless steel construction, start/stop pushbutton control panel, with safety line disconnect & automatic shut off timer, UL, CSA, CE, NSF
P914 S914 500
Pot/Pan Scrap Collector™, scrapping, pre-flushing & collecting system (widely accepted in areas where disposers are restricted), NEMA 4 HYDROLOGIC® control panel with patented operator sensor, two water saving modes (timed run & auto start/stop), safety line disconnect, LCD readout, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen, stainless steel construction, UL, CSA, CE, NSF Scrap Collector™, scrapping, pre-flushing & collecting system (widely accepted in areas where disposers are restricted), NEMA 4 HYDROLOGIC® control panel with patented operator sensor, two water saving modes (timed run & auto start/stop), safety line disconnect, LCD readout, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen, stainless steel construction, UL, CSA, CE, NSF Disposer, basic unit only, 5 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE
300 DF RL-30
Disposer, basic unit only, 3 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE Glasswasher, rotary design, 25" cabinet, 1200 glasses/hr, 12" glass clearance, polypropylene conveyor with clockwise rotation, upper & lower wash & rinse arms, (3) pump injection system, chemical sanitizing, cool water rinse, stainless steel construction, 208-230v/60/1-ph, 15.0 amps, NEMA 6-15P, NSF, cETLus, CSA (includes: authorized factory start-up) Dishwasher, undercounter, 23"W x 25"D x 33-1/2"H, 3.5kw built-in booster, approximately 30 racks/hour cap., auto fill, 2.8kw tank heater, pumped drain, continuous wash cycle, (1) plate & (1) flat rack, stainless steel interior & exterior, TempGuard™ final rinse temp control, thermostatic controls, 1 HP wash motor, cULus, UL EPH CLASSIFIED, UL-Sanitation, ANSI/NSF 3